
Underpinning means giving a footing new support from below. The two systems we use most are steel push piers and helical piers, and the choice depends on the house and the ground.
Push piers are short sections of steel pipe driven down one after another, using the weight of the house as the reaction, until they reach load-bearing soil or rock. They suit heavier brick and block houses, which is a lot of Louisville. Helical piers have steel plates shaped like a screw thread and are turned into the ground with a hydraulic drive head. They suit lighter structures, porches and additions, and places where the house is too light to push against.
Either way, a bracket is fixed under the footing and the pier is tied to it. With all the piers on a section in place, the load is transferred and, if the plan calls for it, the section is lifted. Pier depth is recorded at each location. Karst ground means firm bearing can sit at very different depths a few feet apart, so we don't guess, we drive and measure.
Louisville Metro usually wants a structural engineer's report before it issues the building permit for piering. We arrange both.
What the work includes
System picked for the house
Push piers for heavy masonry, helical piers for lighter loads and additions.
Depth recorded
Each pier driven to load-bearing soil with the depth and pressure noted.
Brackets at the footing
Steel brackets fixed under the footing to carry the load to the pier.
Lift if needed
Sections lifted together, slowly, to the height agreed in the plan.
Engineer and permit
Engineer's report and Louisville Metro permit arranged before work starts.
Backfill and cleanup
Pier holes filled and compacted, soil graded away from the house.
Planning prices in Louisville
| Item | Typical range | What moves the price |
|---|---|---|
| Steel push pier, installed | $1,200 – $3,000 each | Depth to bearing, access |
| Helical pier, installed | $1,500 – $3,500 each | Load, plate size, depth |
| Engineer's report for permit | $400 – $1,200 | Size of the job |
| Louisville Metro permit fee (foundation only) | $75 – $125 | Single-family at the low end |
Most corners need three to eight piers. Ranges are for planning only. Your own price is written down after the inspection, before any work. See the full cost guide.
On the job


Questions about piers and underpinning
How deep do the piers go?
As deep as it takes to reach load-bearing soil or rock. In parts of Louisville that is shallow; in others it is much deeper. Every pier depth is recorded for you.
Push piers or helical piers?
Push piers for most heavy brick and block homes. Helical piers for lighter structures or where we need support before the house weight is on it, like a porch or a new addition.
Can piers go inside the basement?
Yes, through the basement floor along an interior wall or under an interior footing, when outside access is blocked.
Will piers stop all future cracking?
They stop the supported section from settling further. Cracks from shrink-swell elsewhere, or from drainage, still need their own fix. We tell you what the piers will and won't do.
Related: Settling and House Leveling · Foundation Repair · Slab Foundation Repair · Louisville Foundation Permits
